My Dream Miter Saw Station, Part 2 (Drawer Assembly and Installation)

Building a dream miter saw station has always been a goal of mine! It was a massive project but I am so glad that I took the time to knock it out. I made my miter station BEEFY – I used 3/4 inch maple plywood on most of it, including the cabinet backs and drawers. Not only it this big enough o handle all the cutting I do, but also has tons of drawers for storage. In PART 1 of my 3 video series, I am going to show you how I did the Base Cabinets and the Torsion Box that the small drawers will fit into and the miter saw sits in. Check out the details below…

Dream Miter Station Part 2 Field Treasure Designs 6

Before we get started, make sure to follow me on YouTube, Facebook, Pinterest and Instagram to keep up with all my latest projects! Also do you know about my podcast, The Field Treasure Show! https://spoti.fi/2CSJgFF
/
If you haven’t see Part 1, you might want to check this one out first.  Here’s the Part 1 video on YouTube and scroll down for Part 2 and details!

/

SUBSCRIBE to my channel here: http://bit.ly/2LQB1gi

__________

//////  MATERIALS USED

(6) 4’ x 8’ 3/4″ Maple Plywood
Layout Tool for Cutting: http://workshop-buddy.com
(4) 22″ Full Extension Ball Bearing Drawer Slides: https://amzn.to/2wLVVdm
1.5″ Pocket Hole Screws
#8 1″ Wood Screws
1.5″ Cabinet Screws

//////  TOOLS USED

DeWalt D745 Table Saw: https://amzn.to/2IQJJLl
DeWalt Miter Saw: https://amzn.to/2GGrLdI
Bosch Circular Saw: https://amzn.to/2GJnPt3
Kreg Rup Cut Guide: https://amzn.to/2EgrhtC
4’ Level: https://amzn.to/2X78RCG
Stanley Powerlock Tape Measure: https://amzn.to/2IlJhGM
Bosch 12v Jigsaw: https://amzn.to/3bf8rkk
Random Orbital Sander: https://amzn.to/2SBg5My
Sanding Discs: https://amzn.to/2M98HWy
18v Bosch Drill/Driver: https://amzn.to/2SB1kth
12v Bosch Drill/Driver:  https://amzn.to/2BWJHNl
Ryobi 18G Nail Gun: https://amzn.to/2VckbOU
Bosch Router: https://amzn.to/2Efi84h
Bosch Router Table: https://amzn.to/3bhVir2
Kreg K5 Pocket Hole Jig: https://amzn.to/3eqD0p9
Kreg Clamps: https://amzn.to/3cknqtp , https://amzn.to/3bc7dXd
1/2″ Chisel: https://amzn.to/3adpuC0

 

 

/////  PHOTO, VIDEO & EDITING I USED

Canon 80D: https://amzn.to/2VHhzab
Canon 10-18mm Wide Lens: https://amzn.to/2CNa2zh
Canon 50mm Lens: https://amzn.to/2COnzq8
Canon 18-55mm Lens: https://amzn.to/2Mepfwo
Rode Video Mic: https://amzn.to/2VIBR2V
iPhone X: https://amzn.to/2VrCf64
Tripod: https://amzn.to/2R9Qq12
iPhone Tripod Mount: https://amzn.to/2SzTd09
iMac: https://amzn.to/2VrstAJ
Recording to iPhone: https://amzn.to/2C0UshJ
Recording to computer: https://amzn.to/2BWNH0j


Check out the process of Part 2 in the photos below!

Dream Miter Station Part 2 Field Treasure Designs

Dream Miter Station Part 2 Field Treasure Designs 4

Dream Miter Station Part 2 Field Treasure Designs 4

Dream Miter Station Part 2 Field Treasure Designs 6

Dream Miter Station Part 2 Field Treasure Designs 6

Dream Miter Station Part 2 Field Treasure Designs 6

Dream Miter Station Part 2 Field Treasure Designs 6

Dream Miter Station Part 2 Field Treasure Designs 6

Dream Miter Station Part 2 Field Treasure Designs 6

 


In case you missed my latest blogs! Click HERE.


Here are some other videos you might enjoy!

 

 

Thanks for reading about My Dream Miter Saw Station, Part 1 (Base Cabinets & Torsion Box)

Share this post
  , , , , ,