This is probably the first blower review that doesn’t show any blowing! Ha! Well the specs are virtually the same on these two blowers, and I wanted to “feel” each of them out. I took a good look at the Makita and DeWalt blowers and after some thought, I decided to keep the Makita. I […]
Continue readingCategory Archives: Tools
Ryobi Pressure Washer (1800 PSI 1.2 GPM) Unbox & Review
We needed a Pressure (Power) Washer for a bunch of different outdoor cleaning projects around our house. I wanted to get one that matched both power and reliability without major cost. After looking at a lot of brands and models, we settled on the Ryobi 1800 PSI 1.2 GPM Power Washer (129.99 at the time) […]
Continue readingRyobi 18V Cordless Router Unbox & Review
I have been wanting a cordless router for a while now and since I have a few Ryobi tools and batteries, I thought I would give their One+ 18V Cordless Router a test. I have been working on building a table out of plywood and I need to round over the edges so I thought […]
Continue readingWorld’s Smallest Table Saw?!
I was walking through Harbor Freight (It’s a discount hardware store here in the states) and I noticed this 4″ table saw and knew I had to check it out! Is this the world’s smallest table saw? I don’t know but I was excited to bring it to the shop for an unbox and review. […]
Continue readingBosch VS Makita Cordless Random Orbit Sander
After years of using the same corded DeWalt Random Orbit Sander, it’s time for a change. There are THREE major boxes I have to check when selecting a new one. 1) Fast braking. When I turn it off, I do not want to wait for the sanding head to stop rotating. 2) Weight. I want […]
Continue readingHow to Install a Deadbolt
Our front door did not have a deadbolt and we felt that we wanted that extra layer of security so I decided to tackle the job and installed the deadbolt myself. It’s an easy job and can be done in about an hour. In my video I show you exactly how to install your own […]
Continue readingSkil 12V Auto Hammer Unbox & Review
Is this a regular hammer killer? I have to admit, I did not know that a tool such as this Auto Hammer even existed. When I first heard about it, I wanted to check it out! Skil was recently purchased from Bosch by Chervon and while I haven’t been much a fan of the new […]
Continue readingChamberlain Smart Garage Door Opener Installation
Our garage door opener was loud and in need of an update and after researching smart garage door openers, I bought the Chamberlain Smart Garage Door Opener. I was a little intimidated by this project because I have ZERO garage door installation experience, but I am thrilled to say I got the job done right. […]
Continue readingBosch Axial-Glide 12″ Miter Saw (Unboxing & Review)
I had always wanted a Bosch Axial-Glide 12″ Miter Saw and when I finally upgraded I was not disappointed. The main feature is the patented “Axial-Glide” system allows the saw to take up less of a footprint on your work bench or miter station. Unfortunately I had to sell it in order to downsize my shop […]
Continue readingGreenworks Drill Driver Unbox & Review
Greenworks Tools sent me their Drill/Driver (model DD24L1520) to check out, so here’s a little review of it. I unbox it, charge it up and drill a few holes and drive some screws. I mainly compared it to my go to Bosch drills and drivers and explain how it feels. Hope this helps! It is […]
Continue readingMAKITA 18V x2 (36V) Cordless Self-Propelled Mower Unboxing & Review
After debating for a few years and doing lots of research, I finally took the plunge and got a Battery (Cordless) Self Propelled Mower! Here is my unboxing and review in hopes that it will help inform you if you are debating on getting a Battery Mower. The mower I bought is the Makita 18V […]
Continue readingDIY Garage Workbench
After moving into our new house, I did not want to spend a lot of time on a new workbench, so I designed and made this Easy DIY Garage Workbench and installed it in record time! It’s open, functional, and best of all it was cheap and fast! Loading… Before we get started, make […]
Continue reading