I think I found the best shop vac! For years, I used a standard shop-vac that I bought at a big box hardware store for my shop work and general vacuuming needs in the garage and for projects. You may have seen my dust-separator cart video that I made for my Ridgid model. If not,
Continue reading »
Get the plans HERE! It’s time to organize with my DIY Battery Charging Station! I was so sick and tired of having a disorganized battery charging situation that I had to make a change. I have tried everything. I have also moved shops a lot so finally I decided to make a Battery Charging Station
Continue reading »
Since I downsized my shop by moving to Denver, Colorado, I knew I needed to also downsize my Miter Saw. After lots of research, I settled on the DEWALT 20V Miter Saw. It only needs one battery and I bought 2, 5Ah batteries so I would always have a backup. It weighs just 30lbs and
Continue reading »
DIY BUCKET STOOL // In today’s episode of Field Treasure Designs, I’m showing you how I completely FAILED at making my own version of the DIY Bucket Stool which can be easily made with concrete, a 5-gallon bucket and some wooden dowels. I also decided to add a cool feature – a cell phone “nook” holder
Continue reading »
In today’s episode of Field Treasure Designs, I’m doing a Home & Shop tour since most of us are stuck at home. I hope all of you are safe and well and maybe this can provide some distraction from your own home and give you a few ideas in the future. Welcome to our home!
Continue reading »
Make a DIY Reclaimed Pallet Clock! / This was one of my best selling products over the life of Field Treasure Designs online retail store. I sold well over 1,000 of these! It’s a fun project that can be done in half a day. I also provide the link to the clock movement that you
Continue reading »
Building a dream miter saw station has always been a goal of mine! It was a massive project but I am so glad that I took the time to knock it out. I made my miter station BEEFY – I used 3/4 inch maple plywood on most of it, including the cabinet backs and drawers.
Continue reading »
Building a dream miter saw station has always been a goal of mine! It was a massive project but I am so glad that I took the time to knock it out. I made my miter station BEEFY – I used 3/4 inch maple plywood on most of it, including the cabinet backs and drawers.
Continue reading »
Learn how to build your own DIY Cornhole Board Hanger! After seeing cornhole board hangers on amazon for over $30, I decided to make my own out of a 2×4! Check out the details below… Before we get started, make sure to follow me on YouTube, Facebook, Pinterest and Instagram to keep up with all my latest projects! Also do
Continue reading »
In today’s episode of Field Treasure Designs, I show you how I used a DRYER VENT to make some concrete bookends. This was a super easy project that turned out unique and cool! Check out the details below… Before we get started, make sure to follow me on YouTube, Facebook, Pinterest and Instagram to keep up with all
Continue reading »
Let’s face it. Shop Vac casters are terrible! The don’t roll or swivel very well and are cheap plastic and loud. In today’s episode, I am going to show you how I upgraded my shop vac with some awesome new casters. After searching around for some new ones that could just plug into the holes
Continue reading »
My daughters have been begging me for beds for a long time and I finally took the time to deliver! I knew I wanted to do platform beds for them, as we are moving toward the modern look as well as easy to move since we will be moving homes again soon. I had this
Continue reading »
