DIY Battery Charging Station
It’s time to organize with my DIY Battery Charging Station! I was tired of having a disorganized battery charging situation that I had to make a change. I have tried everything. I have also moved shops a lot so finally I decided to make a Battery Charging Station that not only was perfectly functional but can EASILY move wherever I need it to be. This is a really easy build and the payoff is HUGE! Check out details below.
///// MATERIALS USED
(1) 2’ x 4’ 1/2″ Plywood
(2) 1″ x 4″ x 8′ Select Pine
1″ Wood Screws
3/4″ Wood screws
1″ Cabinet Screws
2.5″ Screws (for mounting french cleats to wall studs)
(1) 2′ long x 3/4″ PVC Pipe
Wood Glue: https://amzn.to/3cwyioa
Gluebot: https://amzn.to/2RWE6j3
Silicon Glue Brush: https://amzn.to/2XSLShG
////// TOOLS USED
DeWalt D745 Table Saw: https://amzn.to/2IQJJLl
Bosch Miter Saw: https://amzn.to/2xRvaVl
Makita 18V Track Saw: https://amzn.to/3cEfDXK
Makita Tracks (Guide Rail): https://amzn.to/3cBOggN
Stanley Powerlock Tape Measure: https://amzn.to/2IlJhGM
18v Bosch Drill/Driver: https://amzn.to/2SB1kth
12v Bosch Drill/Driver: https://amzn.to/2BWJHNl
Bosch Router: https://amzn.to/2Efi84h
Square: https://amzn.to/2XUodxl
///// PHOTO, VIDEO & EDITING I USE
Canon 80D: https://amzn.to/2VHhzab
Canon 10-18mm Wide Lens: https://amzn.to/2CNa2zh
Canon 50mm Lens: https://amzn.to/2COnzq8
Canon 18-55mm Lens: https://amzn.to/2Mepfwo
Rode Video Mic: https://amzn.to/2VIBR2V
iPhone X: https://amzn.to/2VrCf64
Tripod: https://amzn.to/2R9Qq12
iPhone Tripod Mount: https://amzn.to/2SzTd09
iMac: https://amzn.to/2VrstAJ
Recording to iPhone: https://amzn.to/2C0UshJ
Recording to computer: https://amzn.to/2BWNH0j
In case you missed my latest blogs! Click HERE.
Here are some other videos you might enjoy!
Thanks for reading about my DIY Battery Charging Station!
